VIEW FULL VERSION: Link
Title: Paint Pail Mould Manufacturers Introduces The Process Of Mold Polishing
Tags: Paint Pail Mould
Blog Entry: In modern industry, most molds need to be polished and polished, because polishing can improve the aesthetics of the product. There is a category. In the mold polishing processing industry, it can also make demoulding easier, which can promote factory processing and save costs. After the ordinary mold is polished, the user needs electroplating, which can greatly improve the wear resistance and corrosion resistance of the mold. Next,  Paint Pail Mould Manufacturers  introduces what are the details that need to be paid attention to when polishing molds? The polished product has low surface roughness, high flatness, and high finish, so the surface of the plastic parts produced is brighter, just like the cosmetics on the product. The details of the mold polishing need to pay attention to: the polishing environment of the mold should be carried out in a clean and ventilated place, because the hard dust is easy to drill into the plaster and will damage the surface with good wear; the mold should be polished from the angle, edge, sheet or mold The other parts begin. Each polishing tool is only suitable for one type of drilling plaster, and pay attention to dust. The hand and workpiece should be cleaned every time the drill bit is replaced, and the polishing pressure should be adjusted to match the hardness of the polishing tool and the size of the plaster drilled. For the best drilling plaster, the pressure is only as great as the weight of the polishing tool. Through the above introduction,  China 20L Pail Mould Suppliers  hopes that you can simply refer to the content of this article in future use.