BLOGS   WRITE NEW BLOG   EDIT BLOGS  
 
RSS
Precautions For Replacement Of Ignition Distributor Factories
Posted On 21/12/2021 03:04:15 by jiachengqiche

Installation point The ignition coil of china car ignition coil manufacturers can always solve the problem of checking engine lights flickering due to a fire in an ideal situation. If this is the case, partial returns are not required. Facts have proved that the cause of the misfire is not just the direct absence of sparks from the ignition coil.

Ignition coils come in various sizes and colors, but they always have three common components. The primary winding, the secondary winding, and the non-conductive or dielectric insulating material separating the two windings are included. The insulating layer is usually a dielectric resin, which is placed in a vacuum to avoid the formation of air bubbles. Air bubbles may provide a channel for current to pass through the coil, causing the coil to fail prematurely.

Heat, vibration, or problems on the secondary side of the ignition system can cause the coil to fail. The ignition coil is usually connected to the cylinder head, located on the top or inside of a specific well of the cylinder. High temperature and vibration may damage the insulating material and cause the internal coil to breakdown. Worn secondary ignition components such as spark plugs or wires may make the coil work more difficult, require higher voltages and shorten the life of the coil.

Due to the failure of the coil, the power may not reach the intended destination. When this happens, the electricity generated in the secondary winding will find a path to ground with the least resistance. This route most often appears in the boot or body of the coil. Carbon tracking occurs when oil, dust, or moisture electrostatically attaches to the protective cover or insulator and provides access to the ground. If carbon traces are found, the coil and related plugs must be replaced. It is also feasible that a malfunctioning ignition coil may damage the engine computer (commonly known as the ignition control module).

Replacement point ignition distributor factories fire coils are usually aimed at avoiding pattern failures that plagued the original ignition coils. Improved dielectric materials that properly insulate the secondary and primary coils are an example of these enhancements. In addition, the design of the ignition control module can be improved so that it can withstand higher levels of temperature and vibration.

The customer at the counter should ask if the coil has been returned and the reason for the return. Because the coils are inspected before the equipment is boxed, for some suppliers, the production failure of the coils is very low or non-existent.

Tags: China Car Ignition Coil Manufacturers Ignition Distributor Factories



Bookmark:




*** Look2Win ***